Alecto DBX-88 User Manual

8
• Use
or to select the minimum temperature.
• Press
to confirm. Saved is displayed for 2 seconds.
• The maximum temperature setting is displayed.
• Use
or button to scroll and select the maximum
temperature for the room.
• Press
. The display reads Saved and then returns to
Temperature menu.
• Press
to exit.
Note: If the temperature goes beyond the minimum or maximum level,
“Low” or “High” indication displays and the current temperature
flashes in the displays of both Units. If the Temperature alert is
set to On, an alert will be sound at the Parent Unit. The alert
sound will goes off automatically when the temperature falls
within the pre-set range.
If the Temperature falls below 7˚C or rises above 33˚C, -- will be
flashing on the 7-segment.
Setting the Temperature Alert
• Press
. Use or button to scroll until Temperature
is displayed.
• The current temperature will also display.
• Press
. Use or button to scroll until Alert On/Off
is displayed.
• Press
.
• If current temperature alert is off, Alert On? is displayed.
• If current temperature alert is on, Alert Off? is displayed.
• Press
to confirm. Saved is displayed and then returns to
Temperature menu.
• Press
to exit.
Note: Pressing any button can suppress the alert until temperature
goes beyond further 2 degrees.
Sound Alert
Sound alerts are played only on the Parent Unit. You can turn on/off
the sound alerts through the menu.
• Press
. Use or button to scroll until Sound Alert is
displayed.
• Press
.
• If the sound alert is currently off, Alert On? is displayed.
• If the sound alert is currently on, Alert Off? is displayed.
• Press
to confirm. Saved is displayed and then returns to
Sound Alert menu.
• Press
to exit.
Lullaby
There are 5 lullabies. Each lullaby last approximately 30 seconds and is
played repeatedly for 5 minutes.
There are five lullabies to choose from, Lullaby 1, Lullaby 2, Lullaby 3,
Lullaby 4 & Lullaby 5. You can also select Play All from the menu to
play for a medley of all 5 lullabies for 5 minutes.
Playing the Lullaby
Baby Unit
• Press
. The name of the last played lullaby is displayed.
• Press
again to select the lullaby you want to play.
• Press
to play. Press again will stop the playing.
• Press
to pause.
• During lullaby play, the name of the lullaby and the
icon are
displayed.

Alecto DBX-88 Specifications

General

Brand	Alecto
Model	DBX-88
Category	Baby Monitor
Language	English