9
Parent Unit
• Press
. Use or button to scroll until Lullaby is
displayed.
• Press
. Play? is displayed. Press . The last played
lullaby will be played and the
icon will be displayed.
• If you want to play another lullaby,
• press
or . The display will show Select New.
• Press
to confirm. Use or button to select.
• Press
to confirm and the lullaby selected will be
played.
• During lullaby play, you can still access to the Menu
• Press
. The display will read StopLullaby?
• Use
or button to scroll. The next menu item will
be displayed. For example, press
the display will show
Light On?. Press
the display Temperature.
• Press
to enter into the menu.
Temporarily Stopping the Lullaby Play
You can stop the lullaby play temporarily.
Baby Unit
When lullaby is playing,
• Press
to pause. Paused is displayed and the icon
flashes on both units.
• Press
will resume the lullaby play.
• If lullaby play is not resumed within 60 seconds, lullaby will stop
automatically.
Parent Unit
When lullaby is playing,
• Press
to pause. Paused is displayed and the icon
flashes on both units.
• Press
will resume the lullaby play.
• If lullaby play is not resumed within 60 seconds, lullaby will stop
automatically.
Stopping the Lullaby Playing
Baby Unit
When lullaby is playing,
• Press
will stop the lullaby play. The icon displayed on
both units will turn off.
Parent Unit
When lullaby is playing,
• Press
. The display shows StopLullaby?.
• Press
will stop the lullaby play. The icon displayed on
both units will turn off.
You can also stop the lullaby playing from the Lullaby menu.
• Press
. The display shows StopLullaby?.
• Use
or button to scroll until Lullaby is displayed.
• Press
. The display will read Stop?
• Press
to stop the lullaby playing.
Out of Range
When the baby and parent units have no link with each other (eg. Out
of range, parent unit or Baby unit is not powered on), the green Link
LED flashes. If there is no link for more than 30 seconds, Not Linked
will be displayed on both units. The link break alert will also be emitted
from the speaker of the Parent Unit every 30 seconds. The red Link
LED will flash. When the units are linked, the green Link LED will be
steadily lit.
Note: Link break alert cannot be manually set on or off, but it can be
suppressed for 3 minutes by pressing any button.
To Next Page
Loading...
Need help?
General
