To Next PageTo Next Page
Need help?Do you have a question about the Alecto SA-210 and is the answer not in the manual?
General| Brand | Alecto |
|---|---|
| Model | SA-210 |
| Category | Smoke Alarm |
| Language | English |
Install near bedrooms and exits to ensure accessible escape routes during a fire.
Use multiple detectors for increased safety and alerts before escape routes are blocked.
Mount on ceiling, maintaining specific distances from walls and corners for optimal detection.
Avoid kitchens, bathrooms, garages, near vents, ceiling nooks, and extreme temperatures.
Attach the ceiling plate, mount the detector, and perform an initial two-second test.
Detector flashes LED every 30s; sounds alarm on smoke detection, stops automatically when clear.
Reduces sensitivity for 9 minutes when TEST/HUSH button is pressed.
Hold test key for 5 seconds; expect 2-3 tones. Test weekly.
Evacuate if alarm is unclear, keep away from children, protect from dust during renovations.
Detector is maintenance-free; clean with vacuum in dusty rooms.
Map routes, ensure everyone knows alarm sound, practice escape plan regularly.
Follow plan immediately, check doors for heat/smoke, stay low in smoke.
Built-in lithium battery lasts 10+ years; chirping every 30-40s indicates replacement needed.
Recycle used batteries and product as electrical waste; do not discard as normal waste.
Details mounting type, power source, autonomy, interconnectivity, and alarm features.
Lists CE marking, standard EN 14604, manufacturer Hesdo BV, and essential characteristics.
