Do you have a question about the Alecto SA-41 and is the answer not in the manual?
Process for linking multiple SA-41 smoke detectors wirelessly for synchronized alarms.
Temporarily disables the alarm for approximately 10 minutes with a visual indicator.
Procedure for testing single and all connected smoke alarms using the test button.
Guidance on alarm causes, child safety, and protection during construction work.
Process for linking multiple SA-41 smoke detectors wirelessly for synchronized alarms.
Temporarily disables the alarm for approximately 10 minutes with a visual indicator.
Procedure for testing single and all connected smoke alarms using the test button.
Guidance on alarm causes, child safety, and protection during construction work.
| working voltage | DC3V |
|---|---|
| average stand-by current | < 5 mA |
| average alarming current | < 40 mA |
| alarming sound level | 85dB/3m |
|---|---|
| alarming LED | red LED |
| LEARN LED | red LED |
| frequency | 433.050 - 434.790 Mhz |
|---|---|
| transmit power | < 10 dBm |
| duty cycle | < 10% |
| transmission distance | < 20m |
|---|---|
| working temperature range | -10 ºC ~ 40 ºC |
Loading...