Aleko Inflatable SPA - User Manual

Questions and Answers

L
Leah PerryJul 27, 2025
Why is the Aleko Hot Tub heating system not operating?
- C
  Charles EvansJul 28, 2025
  If the heating system in your Aleko Hot Tub isn't working, check these possible causes: * The temperature might be set too low, so set it to a higher temperature (20-42°C). * The filter cartridge might be dirty, so clean or replace it. * The water levels might be improper, so add water to the specified levels. * If none of these work, the heating element may have failed, and you should call for service.
K
kristen63Aug 2, 2025
What to do if my Aleko Hot Tub water is not clean?
- H
  Hayley WallsAug 2, 2025
  If the water in your Aleko Hot Tub isn't clean, it might be due to insufficient filtering time, a dirty filter cartridge, or improper water maintenance. Try increasing the filtration time. Also, clean or replace the filter cartridge. For water maintenance, refer to the chemical manufacturer’s instructions.
D
doris75Aug 9, 2025
What to do if my Aleko Hot Tub has a spa leakage?
- H
  Heidi NobleAug 9, 2025
  If your Aleko Hot Tub is leaking, it may be torn or punctured. Use the provided repair patch to fix it.
T
taylormichaelAug 15, 2025
Why is the Aleko Inflatable SPA filtering system not operating?
- E
  Elizabeth BrooksAug 15, 2025
  If the filtering system in your Aleko Hot Tub isn't working, the cause might be a dirty filter cartridge. Clean or replace the filter cartridge. If that's not the issue, there might be something wrong with the power box, so call for service if it does not reset. Also, too low voltage or incorrect frequency might be the cause, so ask a professional electrician to check whether the household input voltage or frequency is normal.
S
Stacy MosesAug 20, 2025
How to fix an Aleko Inflatable SPA jet system that does not operate?
- B
  brandimendezAug 20, 2025
  If the jet system on your Aleko Hot Tub isn't working, it could be because the air pump is too hot. Unplug the air pump, and after it has cooled down, insert the plug and press the Jet button to activate. If this does not work, there may be something wrong with the power box; call for service if it does not reset.

Summary

Safety Instructions

General Warnings

Covers electrical safety, child supervision, operating conditions, and proximity to hazards.

Health and Pregnancy Precautions

Warnings regarding hot water effects on pregnancy, alcohol/drug use, and health conditions during spa use.

Operational and Environmental Cautions

Cautions related to spa placement, temperature, chemical handling, and child usage/supervision.

Product Specifications

Installation Guide

Site Requirements and Preparation

Covers floor load capacity, drainage, level surface, and specific considerations for indoor/outdoor installation.

Assembly and Inflation

Steps for unfolding the spa, connecting hoses, and inflating the tub.

Inflation Details and Component Attachment

Instructions on inflating the spa tub, handling over-inflation, and attaching the filter cartridge.

Filling and Securing the Cover

Steps for filling the spa with water to the correct level and securing the cover.

Operation and Controls

Control Panel Overview

Explanation of the FILTER, BUBBLE, and Jet keys and their operation, including maintenance reminders.

Heating and Temperature Management

Details on using the HEATER key and setting the spa water temperature via the TEMPERATURE key.

Spa Body and Water Management

Guidance on water filling levels and basic water maintenance principles for the spa body.

Maintenance Procedures

Water Care and Balance

Instructions for cleaning filter cartridges, maintaining water balance (pH, alkalinity, chlorine), and sanitation.

Filter Cartridge Maintenance

Step-by-step guide for unplugging, removing, cleaning, and reassembling the filter cartridge.

Drainage Preparation

Steps for unplugging the power and preparing the spa for water drainage.

Completing Drainage and Spa Cleaning

Finishing the drainage process, cleaning the air pipeline, and general spa cleaning instructions.

Repair and Storage

Spa Repair and Winter Storage

Guidance on repairing punctures and proper storage procedures, including winterization advice.

Troubleshooting Common Issues

Problem Diagnosis and Solutions

Diagnosing and resolving issues like jet system failure, heating system problems, leaks, and unclean water.

Water Protection Levels

Electrical Safety Guidelines

Zone Safety and Equipment Requirements

Details electrical safety zones (0, 1, 2) and specific requirements for bonding, protection, junction boxes, and equipment.

Product Disposal Instructions

Aleko Inflatable SPA Specifications

General

Heater Power	1200W
Control System	Digital Control Panel
Voltage	110-120V
Built-in Water Filtration	Yes
Carrying Bag Included	Yes
Cover Included	Yes
Type	Inflatable
Capacity	4-6 people
Material	PVC
Temperature Range	68-104°F
Massage Air Blower	600W
Bubble Power	600W
Inflation Time	5-10 minutes

Related product manuals

Aleko HTIO2BLD

14 pages