EasyManua.ls Logo

Alemite 7234-B - User Manual

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Service Guide
Alemite Corporation
PO Box 473515, Charlotte, North Carolina 28247-3515
Copyright
©
1997 by Alemite Corporation
This document contains confidential information that is the property of Alemite Corporation
670453
and is not to be copied, used, or disclosed to others without express written permission.
Revision (7-97)
SER 7234-B
7234-B
7235-B
3-7/8 "
(9.8 cm)
7 " (17.8 cm)
7-7/8 "
(20 cm)
19 " (48.3 cm)
Dia.
21"
(53.3 cm)
17/32 " (13.5 mm) Dia.
Figure 1
Heavy-Duty Hose Reels Models 7234-B and 7235-B
Description
Caution
These reels must be ceiling mounted at a
height no greater than 16 feet (4.9 m) from
the floor to comply with the warranty.
Hose reel Models 7234-B and 7235-B are
designed to be mounted to the wall, ceiling, or floor.
They can also mount to truck beds.
The reels mount as a single unit or in banks of as
many as required. Banked reels should be a
minimum of 9 " (23 cm) apart on center. For ease in
reel maintenance, a space of up to 15 " (38 cm) is
recommended. See
Figure 6
.
Each model reel is spring-powered and self-
retracting. A latch locks the reel once the required
length of hose is released. A pull releases the latch
and allows the hose to retract onto the reel.
Models 7234-B and 7235-B
Model 7234-B contains a high-pressure swivel
assembly. This swivel is designed to dispense
grease from either 1/4 " or 3/8 " ID two-wire braid
delivery hose.
A medium-pressure swivel assembly is included
with Model 7235-B. Free-flowing lubricants such as
Heavy-Duty Hose Reels
Accessories
Material Delivery Hoses
Reel
Model
High-Pressure Material Delivery Hose
Medium-Pressure Material
Delivery Hose
Low-Pressure Air and Water
Delivery Hose
1/4 " ID Two-Wire Braid 3/8 " ID Two-Wire Braid 1/2 " ID Single-Wire Braid 3/8 " ID Fabric-Reinforced
7234-B 317874-30, 317874-50 317870-50
7235-B
317856-20, 317856-30,
317856-40, 317856-50
317803-25, 317803-30,
317803-40, 317803-50
Delivery hose length is designated by the dash number.
Example
: 317874-30 is 30 feet long.
motor and gear oil, and automatic transmission fluid are
dispensed from 1/2 " ID single-wire braid delivery hose. Air and
water is transported through 3/8 " fabric-reinforced hose.
Question and Answer IconNeed help?

Do you have a question about the Alemite 7234-B and is the answer not in the manual?

Summary

Description

Models 7234-B and 7235-B

Details specific features of hose reel models 7234-B and 7235-B.

Accessories

Lists available accessories and related parts for the hose reels.

Part List

Repair Kits

Service Hints

Remove and Replace

Spring Arbor and Power Spring

Procedure for removing and replacing the spring arbor and power spring components.

Disassembly

Spring Case and Ratchet Assembly

Steps for disassembling the spring case and ratchet assembly.

Sheave Assembly

Steps for disassembling the sheave assembly.

Medium-Pressure Swivel Assembly

Details on disassembling the medium-pressure swivel assembly.

High-Pressure Swivel Assembly

Information on the high-pressure swivel assembly, which is not repairable.

Base Assembly

Steps for disassembling the base assembly.

Clean and Inspect

Assembly

Sheave Assembly

Procedure for assembling the sheave assembly with lubrication.

Medium-Pressure Swivel Assembly

Steps for installing the medium-pressure swivel assembly.

Base Assembly

Steps for installing the base assembly components.

Installation

Bench Test

Setting Spring Tension

Mount Positions

Ceiling Mount

Specific instructions and considerations for ceiling mounting the reel.

Reel Operation

Reel Lockup

Explains how reel lockup occurs and the procedure to release it.

Troubleshooting Chart

Alemite 7234-B Specifications

General IconGeneral
BrandAlemite
Model7234-B
CategoryTools
LanguageEnglish

Related product manuals