EasyManua.ls Logo

Alemite 7235-B - User Manual

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Service Guide
Alemite Corporation
PO Box 473515, Charlotte, North Carolina 28247-3515
Copyright
©
1997 by Alemite Corporation
This document contains confidential information that is the property of Alemite Corporation
670453
and is not to be copied, used, or disclosed to others without express written permission.
Revision (7-97)
SER 7234-B
7234-B
7235-B
3-7/8 "
(9.8 cm)
7 " (17.8 cm)
7-7/8 "
(20 cm)
19 " (48.3 cm)
Dia.
21"
(53.3 cm)
17/32 " (13.5 mm) Dia.
Figure 1
Heavy-Duty Hose Reels Models 7234-B and 7235-B
Description
Caution
These reels must be ceiling mounted at a
height no greater than 16 feet (4.9 m) from
the floor to comply with the warranty.
Hose reel Models 7234-B and 7235-B are
designed to be mounted to the wall, ceiling, or floor.
They can also mount to truck beds.
The reels mount as a single unit or in banks of as
many as required. Banked reels should be a
minimum of 9 " (23 cm) apart on center. For ease in
reel maintenance, a space of up to 15 " (38 cm) is
recommended. See
Figure 6
.
Each model reel is spring-powered and self-
retracting. A latch locks the reel once the required
length of hose is released. A pull releases the latch
and allows the hose to retract onto the reel.
Models 7234-B and 7235-B
Model 7234-B contains a high-pressure swivel
assembly. This swivel is designed to dispense
grease from either 1/4 " or 3/8 " ID two-wire braid
delivery hose.
A medium-pressure swivel assembly is included
with Model 7235-B. Free-flowing lubricants such as
Heavy-Duty Hose Reels
Accessories
Material Delivery Hoses
Reel
Model
High-Pressure Material Delivery Hose
Medium-Pressure Material
Delivery Hose
Low-Pressure Air and Water
Delivery Hose
1/4 " ID Two-Wire Braid 3/8 " ID Two-Wire Braid 1/2 " ID Single-Wire Braid 3/8 " ID Fabric-Reinforced
7234-B 317874-30, 317874-50 317870-50
7235-B
317856-20, 317856-30,
317856-40, 317856-50
317803-25, 317803-30,
317803-40, 317803-50
Delivery hose length is designated by the dash number.
Example
: 317874-30 is 30 feet long.
motor and gear oil, and automatic transmission fluid are
dispensed from 1/2 " ID single-wire braid delivery hose. Air and
water is transported through 3/8 " fabric-reinforced hose.
Question and Answer IconNeed help?

Do you have a question about the Alemite 7235-B and is the answer not in the manual?

Summary

Product Description and Models

Mounting Caution

Safety warning regarding mounting height for warranty compliance.

Parts and Repair Kits

Part List

Provides a detailed list of part numbers and descriptions.

Service Hints

Spring Case Handling

Handle spring case separation with extreme caution to avoid injury.

Remove and Replace Procedures

Spring Arbor and Power Spring

Step-by-step guide for removing and replacing the spring arbor and power spring.

Disassembly Procedures

Spring Case and Ratchet Assembly

Disassembly steps for the spring case and ratchet assembly.

Assembly Procedures

Sheave Assembly

Step-by-step guide for assembling the sheave assembly.

Installation

Mount Positions

Reel Operation and Lockup

Troubleshooting

Alemite 7235-B Specifications

General IconGeneral
Model7235-B
CategoryTools
Air Inlet1/4" NPT
MaterialSteel
TypePneumatic Grease Pump
Grease Delivery1.5 oz per cycle

Related product manuals