Service Guide
SER 7786-A5
Alemite, LLC
167 Roweland Drive, Johnson City, Tennessee 37601
www.alemite.com
Copyright
©
2006 by Alemite, LLC
This document contains confidential information that is the property of Alemite, LLC
396910 and is not to be copied, used, or disclosed to others without express written permission. Revision (1-13)
7786-A5
7786-C
7786-MA
Specifications
Air Motor
Pump Tube
Pump
Model
Air Inlet
Max.
Air Pressure
Body Adapter psi bar
7786-A5, -C
3/4" NPTF
Not Applicable
100 6.9
7786-MA 3/4" BSPP (f) x 3/4" NPTF (m)
For additional specifications, refer to Service Guide SER 323440-4
Pump Model Material Outlet Adapter
Max.
Material Pressure
Delivery/Min.
(Approximate) **
Displacement
per Cycle
psi bar lbs. kg
in
3
cm
3
7786-A5 and 7786-C 1/2 " NPTF (f) x 1/2 " NPTF (m)
7500 517 12.5 5.7 1.36 22.3
7786-MA 1/2 " BSPP (f) x 1/2 " NPTF (m)
** For detailed information, refer to Figure 3
Table 1 High-Pressure Pump Model 7786 Series Specifications
Figure 1 High-Pressure Pump Model 7786 Series
Model 7786-A5 Shown
Description
The major components of the pump models in the 7786 series
consist of an air-operated motor and a pump tube. The air motor
connects directly to the double-acting reciprocating pump tube.
These high-pressure non-divorced grease pumps (75:1 ratio)
are designed to deliver a range of greases (up to NLGI # 3) and
operate directly from their original drums or bulk containers*.
Models 7786 Series Comparison
Each pump model is designed with a pump tube length to
accommodate different size containers. See Figure 1.
Model 7786-MA is equipped with an air inlet and a material
outlet adapter with BSPP threads. See Table 1.
* Pump model 7786-A5 is operated in various type systems,
Refer to the section entitled Alternate Installation (Page 12) for
details.
High-Pressure Grease Pump
Pump
Model
Container Size X Y
lbs kg Inches Cm Inches Cm
7786-A5 400 -
33-1/8 84 52-1/4 133
7786-MA * - 180
7786-C 120 - 25-5/8 65 44-3/4
114
* With BSPP Inlet and Outlet Adapters (See Table 1)