Remove the protection from the magnet
Fix the magnet on the dashboard of your vehicle, in a
horizontal position.
Place the G200 on the magnet when you want to use
it in your vehicle
Connect the device to the cigar-plug with the power
cable
Installing the G200 with an external antenna:
- fix the external antenna on the roof of your vehicle and
make sure to place the cable inside the cabin of the vehicle.
- connect the antenna to the external antenna connector of
the G200.
- in order to work properly, the device must be fixed in a horizontal position and
as close as possible to the windscreen
- remove the device from the magnet before you leave your vehicle to avoid
degradations and thefts
- climatic conditions may influence the satellite connection.
Important...
Installing the G200
3
Your vehicle may have an athermic windscreen which
may affect the satellite connection. In that case, you
will need to use an optional external antenna.
To Next Page
Loading...