Do you have a question about the ALERTEGPS G200 and is the answer not in the manual?
GPS | Yes |
---|---|
Laser Detection | Yes |
Voice Alerts | Yes |
False Alert Filtering | Yes |
Red Light Camera Alerts | Yes |
Speed Camera Alerts | Yes |
Display | OLED |
Power Source | 12V DC |
Bands Detected | X, K, Ka |
Details the digital screen, buttons (volume, brightness, speed limiter, save), and connectors.
Explains speed display, vocal alerts, overspeed beeps, and other operational indicators.
Instructions for attaching the magnet, placing the G200, and connecting the power cable.
Guidance on installing an optional external antenna for improved satellite reception.
Key considerations for proper operation, safety, and device care during installation.
Covers starting the G200, adjusting volume, brightness, and using the speed limiter.
Instructions for saving and cancelling user-defined points of interest.
Explains alerts and displays when approaching fixed and mobile speed cameras.
Details alerts and distance countdowns for dangerous curves, black spots, etc.
Information on where to download the necessary software and USB drivers.
Step-by-step guide for installing the software and drivers on a PC.
Describes both automatic and manual procedures for updating the device.
Notes on performance in tunnels, potential for wrong alerts, and GPS dependency.
Guidelines for safe operation, handling, cleaning, and environmental considerations.
Information on software ownership, GPS availability, and responsibility for road safety.