Alesis MultiMix6FX - Page 2

8FX only
MULTIMIX QUICK START OWNERS MANUAL
(ENGLISH)
1. Make sure all items listed on the front of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT
3. Study this setup diagram.
4. Place the Multimix in an appropriate position for operation.
5. Make sure all devices are turned off and all volumes are at “zero”
6. Connect all input sources as indicated in the diagram.
7. Connect the outputs to the power amplifier(s), tape decks, and/or audio sources.
8. Plug your Multimix and other devices into AC power.
9. Switch everything on in the following order:
• Audio input sources
• External effects, recording devises or equalizers
• The Multimix
• Last, any amplifiers
10. When turning off, always reverse this operation by:
• Turning off amplifiers
• The Multimix
• External effects, recording devises or equalizers
• Last, any input devices
11. Go to
http://www.alesis.com/ for product registration.