Need help?Do you have a question about the Alfa Laval LKH Prime 20 and is the answer not in the manual?
General| Pump Type | Centrifugal pump |
|---|---|
| Material | Stainless steel |
| Max Pressure | 10 bar |
| Max. Suction Lift | 8 m |
| Shaft Seal | Mechanical seal |
| Temperature Range | -10°C to +120°C |
| Speed | 2900 rpm |
| Weight | Varies depending on motor size and configuration |
| Impeller Design | Open or closed impeller |
Defines warnings, cautions, and notes for user safety and equipment protection.
Illustrates and explains standard warning symbols used in the manual.
Lists essential safety measures for installation, operation, maintenance, and transportation.
Instructions for checking, unpacking, and inspecting the pump upon delivery.
Detailed steps for correctly installing the pump, including clearance and flow direction.
Steps to check the pump's impeller and shaft rotation direction before operation.
Guidelines for recycling packing materials, worn parts, and the equipment itself.
Instructions for safe operation, including handling hot liquids and pump control.
Identifies common problems, their causes, and recommended remedies for the pump.
Procedures and agents for cleaning the pump, including CIP and sterilization.
Basic maintenance checks, safety precautions, and recommended spare parts.
Detailed steps for cleaning soiled air screw tapped holes and shaft tapped holes.
Step-by-step guide to disassembling the pump and its shaft seals.
Instructions for assembling the pump with a single shaft seal.
Instructions for assembling the pump with a double mechanical shaft seal.
Procedure for adjusting the shaft alignment between the pump and motor.
Details on pump data, materials, shaft seal specifications, and motor.
Table detailing relubrication intervals and recommended grease types for motors.
Specifies tightening torques for screws, bolts, and nuts in the pump.
Provides the weight of the LKH Prime pump for different sizes and power ratings.
Presents sound pressure levels for various pump types under specific conditions.
Diagrams illustrating the LKH Prime pump in its sanitary configuration.
Exploded view diagram showing parts in contact with the product.
Exploded view diagram of parts associated with the pump's motor.
Exploded view diagram detailing the components of the pump's shaft seal.
Detailed lists of pump parts and available service kits with part numbers.
To Next Page