Need help?Do you have a question about the Alfa Laval LKH Series and is the answer not in the manual?
Lists general, installation, operation, and maintenance safety precautions.
Provides step-by-step instructions for physically installing the pump.
Guides on performing pre-use checks for pumps with/without impeller screws.
Explains how to operate and control the pump safely.
Lists common problems, their causes, and recommended remedies for the pump.
Step-by-step guide on how to dismantle the pump and its shaft seals.
Instructions for assembling the pump with a single shaft seal.
Step-by-step guide for assembling the pump with a flushed shaft seal.
Detailed instructions for assembling the pump with a double mechanical shaft seal.
Lists general, installation, operation, and maintenance safety precautions.
Provides step-by-step instructions for physically installing the pump.
Guides on performing pre-use checks for pumps with/without impeller screws.
Explains how to operate and control the pump safely.
Lists common problems, their causes, and recommended remedies for the pump.
Step-by-step guide on how to dismantle the pump and its shaft seals.
Instructions for assembling the pump with a single shaft seal.
Step-by-step guide for assembling the pump with a flushed shaft seal.
Detailed instructions for assembling the pump with a double mechanical shaft seal.
General| Pressure | Up to 16 bar |
|---|---|
| Material | Stainless steel |
| Seal Type | Mechanical seal |
| Pump Types | Centrifugal |
| Impeller Design | Closed |
| Connections | Flange |
| Application | Industrial |
| Pressure Rating | Up to 16 bar (232 psi) |
| Speed | 1450 rpm |
| Temperature Range | -40°C to +140°C (-40°F to +284°F) |
To Next Page
