Need help?Do you have a question about the ALFRA ROTABEST 60 and is the answer not in the manual?
Consolidated safety warnings covering circuit failure, ejector pin, power cords, voltage, protective equipment, magnet foot, and welding.
Details product number, name, input power, load RPM, tool holder type, coolant supply, voltage, and magnetic adhesion.
Lists maximum boring diameter for core cutters and twist drills, cutting depth, tapping capacity, and stroke length.
Step-by-step guide for activating magnet and motor, including safety checks and shutdown.
Details mounting the tool holder, ejector pin, and cutter, plus spot-drilling and cooling.
Crucial safety advice regarding chip removal with a chip-remover tool, avoiding bare hands.
General| Voltage | 230 V |
|---|---|
| Speed Level | 2 |
| Core Drill | 60 mm |
| Stroke | 160 mm |
| Magnetic Adhesion | Yes |
| Weight | 18.5 kg |
| Drill Type | Magnetic Drill |
| Max. Cutting Depth | 50 mm |
| Frequency | 50/60 Hz |
| Tapping | M20 |
To Next Page