Need help?Do you have a question about the ALFRA Rotabest Mini 40/2 WD and is the answer not in the manual?
Key safety warnings, protective gear, and safe operating practices for the drilling machine.
Defines the intended purpose, application environment, and material suitability for the machine.
Detailed technical data: product number, input power, RPM, drilling capacities, and magnetic adhesion.
Visual representation of the machine with labeled components and key dimensions for clarity.
Lists all accessories and parts included in the standard delivery package for the Alfra Rotabest.
Instructions for powering the machine on/off, including magnet engagement and motor start sequence.
Detailed steps for mounting and using annular cutters, including safety advice during operation.
Critical safety notice on removing chips with a tool to prevent hand injuries.
Guide on mounting the drill chuck with adaptor for drilling with twist drills.
Instructions for performing thread tapping operations using the tapping adaptor.
Procedures for cleaning the machine, checking connections, and maintaining sliding surfaces.
Guidelines for maintenance, repair, using genuine parts, and recommended servicing intervals.
Details on the warranty provided for the Alfra Rotabest Metal Core Drilling Machines.
Formal statement of conformity to relevant EU machine, low voltage, and EMC standards.
Information on potential workplace noise levels and the requirement for hearing protection.
Catalog of optional accessories: core cutters, center pins, tapping attachments with product numbers.
Details on drill chucks and tapping attachments, including part numbers and specifications.
Lists specialized accessories: pipe clamping, vacuum devices, and cutting oil for enhanced functionality.
Information on the magnetic chip remover accessory for effective cleaning of metal chips.
Diagram showing an exploded view of the machine's internal components with numbered parts for reference.
List of mechanical components, housing, slides, guide rails, and screws with part numbers.
Details on control cases, printed circuit boards (110V/230V), and earthing screws.
List of electrical parts: PVC housing, magnet switch, motor switches, and bridge rectifier.
Diagram showing the exploded view of the motor (AHN 20/2 W) with numbered parts for identification.
Detailed list of motor parts: housing, armature, bearings, seals, and gears.
List of parts related to the spindle, seals, springs, and control mechanisms.
To Next Page
General
