Need help?Do you have a question about the ALFRA ROTABEST RB 50 SP and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Core Drill Capacity | 50 mm |
| Twist Drill Capacity | 23 mm |
| Type | Magnetic Drill |
| Max core drilling diameter | 50 mm |
| Power input | 1200 W |
| Magnet force | 15000 N |
| Tapping | M 20 |
| Magnetic Adhesion | 15000 N |
| Arbor | 19 mm Weldon |
| No-load speed | 450 rpm |
| Motor | 1, 200 W |
Critical safety warnings and precautions for safe operation.
Advisory for individuals with cardiac pacemakers using the lifting magnet.
Defines intended use and operating environmental conditions.
Interpretation of LED signals for magnet status and holding force.
Explanation of automatic stop and manual deactivation of safety functions.
Explains motor status and carbon brush wear indicated by LEDs.
Details the carbon brush wear detection and replacement process.
Guidance on core drilling techniques, cooling, and swarf removal.
Information on magnet activation, material thickness, and material type effects.
How surface finish and temperature impact magnetic holding force.
Outlines maintenance tasks for different intervals and personnel.
To Next Page
