utilize all implemented functions. This product can be operated in any
Z-wave network with other Z-wave certified devices from other
manufacturers. All non-battery operated nodes within the network will
act as repeaters regardless of vendor to increase reliability of the
network.
-Join a network: inclusion Z-wave network and add the lock.
Follow the user guide of hub to enter inclusion mode.
Operate on lock following guide below:
Enter master mode(refer to programming instruction)
Input “8” to enter “function extension settings”
Input “1” to join a network.
-Log off a network: Exclusion Z-wave network and remove the lock
Follow the user guide of hub to enter exclusion mode.
Operate on lock following guide below:
Enter master mode(refer to programming instruction)
Input “8” to enter “function extension settings”
Input “2” to log off a network.
-Factory reset:
Operations on lock
To Next Page
Loading...
