Alfred DB2 - Page 6

Language Command Class*
V1
Manufacturer Specific Command Class*
V2
Notification Command Class*
V8
Powerlevel Command Class*
V1
Security 0 Command Class
V1
Security 2 Command Class
V1
Supervision Command Class
V1
Time Command Class
V1
Time Parameters Command Class*
V1
Transport Service Command Class
V2
User Code Command Class*
V1
Version Command Class*
V3
Z-Wave Plus Info Command Class
V2
* Command Class Requires Security S0/S2
Command Class Door Lock, Version 2
Alfred Z-wave Plus locks only support 2 door lock modes : Door
Secured(0xFF) and Door Unsecured (0x00)
Alfred locks do not support timed operation from the door lock
command class.
Command Class User Code, Version 1
The door lock will only retain valid user code types(0x00,0x01). All
other values will be ignored.
Alfred locks support multiple different user status bytes:
User status byte value
Description
0x00
available
0x01
occupied