Table of Contents
Direct Fired Vaporizer Options
Auto Reigniter
Contaminant Separator / Filtaire
Economy Valve Kit
Inlet and Outlet Hand Valves
Pipe away Adapter
1st Stage Regulator
1. Introduction
Description/Overview 1-1
Figure 1 – Direct Fired Vaporizer System - Basic Features 1-1
How the vaporizer works 1-2
Direct Fired vaporizer specifications 1-3
2. Installation
General 2-4
Unpacking and Initial Assembly 2-4
Unpacking 2-4
Initial Assembly 2-4
Table 1 – Distance from Vaporizer 2-4
Figure 2 – Vaporizer Dimensions 2-5
Figure 3 – Vaporizer Dimensions 160H Vaporizer 2-5
Liquid Supply Line 2-6
Table 2 – Recommended Liquid Supply Line Size 2-5
Vapor Distribution Line 2-6
Table 3 – Recommended Vapor Distribution Line Size 2-6
Liquid Inlet 2-7
Vapor Bypass Line (Optional) 2-7
Burner Supply Line (Optional) 2-7
Liquid Pump (Optional) 2-8
Economy Installation (Optional) 2-8
Contaminant Separator – Filtaire (Optional) 2-8
Figure 4 – Filtaire Operation 2-9
Air Requirements for Installation in an Enclosure 2-10
Table 4 – Cross-Sectional Inlet/Outlet Air Requirements 2-10
Leak Test 2-10
Check Burner Input Pressure 2-10
Installation Safety Requirements 2-11
To Next Page
