To Next PageTo Next Page
Need help?Do you have a question about the Algo 8188 and is the answer not in the manual?
General| Speaker type | 2-way |
|---|---|
| Speaker placement | Ceiling-mountable |
| Built-in amplifier | Yes |
| Number of speakers | 1 |
| Audio formats supported | G.711 μ-law, G.722, G.711 A-law |
| Sensitivity | 88 dB |
| RMS rated power | 8 W |
| Product color | White |
| Built-in display | No |
| Suitable for outdoor use | - |
| Connectivity technology | Wired |
| Power source type | PoE |
| Power consumption (standby) | 2.5 W |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Width | 205 mm |
|---|---|
| Weight | 2000 g |
| Package weight | 2700 g |
| Driver diameter | 165 mm |
Details on power sources, installation locations, and electrical safety requirements.
Guidance on proper installation to prevent injury or death from falling speakers.
Recommendations for testing and supervision of speakers used in emergency applications.
Step-by-step guide for initial setup, network connection, and basic testing of the speaker.
Details on mounting the speaker in various ceiling types and using support brackets.
Instructions for suspending the speaker from a ceiling or truss using external hardware.
Methods for configuring the speaker via web interface or provisioning features.
Registering the speaker as a SIP extension for voice paging and notification.
Securing SIP signaling and provisioning using Transport Layer Security (TLS).
Securing configuration file downloads using HTTPS to prevent data theft.
Setting the transport layer protocol for SIP messages (TLS for encryption).
Enabling secure SIP connections from endpoint to endpoint.
Configuring SRTP for encrypted RTP audio data transmission.
Details on connecting the speaker to the network via RJ45 and PoE.
Connecting external switches and buttons to trigger actions on the speaker.
Procedure for resetting the speaker to factory default settings.
Steps for accessing and logging into the speaker's web interface.
Configuring SIP server information and account credentials.
Configuration options for multicast mode, type, and zone definitions.
Configuring pre-recorded announcements triggered by calling an extension.
Configuring network interface, IP settings, and VLAN modes.
Configuration for administrator password, device name, and session timeout.
Details on setting and resetting the web interface administrator password.
Enforces password complexity requirements for added security.
Enables encrypted storage of SIP passwords.
Configures provisioning mode, server method, and download method.
Steps to create and upload a generic configuration file for multiple devices.
Steps to create and upload a configuration file specific to a MAC address.
SIP transportation, SIPS scheme, and SRTP settings for secure communication.
Master settings for multicast, including codec and packetization time.
System maintenance tasks including backup, restore, and reboot.
Resets all device settings to factory default values.
Procedure for upgrading the speaker firmware.
Details power requirements and SIP extension capabilities.
