Need help?Do you have a question about the Algo 8180 and is the answer not in the manual?
General| Weatherproof Rating | IP66 |
|---|---|
| Power Source | PoE (Power over Ethernet) |
| Network Protocols | HTTP, HTTPS, DHCP, DNS, TCP, UDP, RTP |
| Audio Codecs | G.711, G.722 |
| Mounting Options | Wall, pole |
Details how the 8180 connects to a communication server using SIP extensions for ringing and paging.
Explains how multiple units can play audio simultaneously for scalable paging and alerting.
Provides step-by-step instructions for initial setup, network connection, and testing the device.
Configures terminal block functions for speaker mode and relay terminal as input or output.
Explains registering the 8180 as a SIP extension for voice paging and its configurable options.
Introduces multicast capabilities for large-scale paging and notification solutions.
Details how to access and log into the 8180's web interface using default credentials.
Configures ring tones, volume, and limits for inbound ring events on the SIP extension.
Sets page speaker volume, mode, timeout, tone, and G.722 codec for voice paging.
Details the IP address and port number ranges for multicast communication.
Defines nine basic multicast zones and their priority hierarchy for audio distribution.
Configures the 8180 as a master to broadcast IP streams for multicast paging.
Configures the 8180 to receive and mimic multicast audio streams.
Selects 'Regular (RTP)' for multicasting to Algo SIP endpoints and multicast-enabled phones.
Configures slave for Polycom page announcements, matching Polycom phone settings.
Configures terminal block functions for speaker mode and relay terminal as input or output.
Defines actions for input triggers: play tone, make SIP call, or stream mic audio.
Sets actions to perform when tamper is detected, such as playing a tone or sending a message.
Specifies how the input relay responds to switches, including Algo call buttons.
Configures actions for input triggers to play a tone or pre-recorded WAV file.
Allows triggering pre-recorded announcements via extension calls for emergency notifications.
Allows registering dedicated extensions for each paging zone for direct zone access.
Allows registering additional extensions for multiple loud ringing alerts with unique ring tones.
Configures network interface, IP address, netmask, gateway, and DNS settings.
Manages administrator password, device name, session timeout, and startup tone.
Configures timezone, NTP time servers, and device date/time settings.
Configures provisioning mode, server method, and download method for automated setup.
Instructions for uploading custom WAV audio files for notification applications.
Configures audio functions like Dynamic Range Compression, Jitter Buffer, and filters.
Configures SIP transportation, SRTP offer, outbound proxy, and NAT settings.
Configures advanced multicast settings for slave devices, including audio sync.
Manages configuration backup/restore, user files, and device reboot operations.
Step-by-step guide for upgrading the device firmware via the system maintenance menu.
Accesses system log files for troubleshooting device behavior.
Details RJ45 network connection, PoE requirements, and Ethernet jack indicator lights.
Explains connecting input switches and buttons to the dry contact relay terminals.
To Next Page
