To Next PageTo Next Page
Need help?Do you have a question about the ALIBI ALI-NVR5100P Series and is the answer not in the manual?
General| Brand | ALIBI |
|---|---|
| Model | ALI-NVR5100P Series |
| Category | Network Hardware |
| Language | English |
FCC compliance and conditions for device operation.
Important operational advice and warnings before using the device.
General safety guidelines for installation and device usage.
Identifies and describes the physical NVR components.
Explains how to use a USB mouse with the NVR for navigation.
Describes the on-screen keyboard for data entry.
Lists included items and required external components.
Provides general recommendations for NVR installation.
Step-by-step instructions for internal hard drive installation.
Guidance on selecting a suitable physical location for the NVR.
Instructions for wiring alarm input and output terminals.
Details for connecting external sensors to alarm inputs.
Details for connecting external devices to alarm outputs.
Connecting essential peripherals for initial setup.
Steps to connect cameras and power for initial operation.
Guide to the initial system configuration wizard.
How to open and navigate the NVR's main configuration menu.
Settings for individual connected cameras.
Configuring On-Screen Display settings for cameras.
Adjusting camera image parameters like brightness and contrast.
Configuration options for PTZ-capable cameras.
Setting up motion detection zones and sensitivity.
Defining privacy zones to mask specific areas in video.
Configuring alerts for video tampering detection.
Configuring alerts for video signal loss.
Setting up Video Content Analysis features.
Procedure to manually add IP cameras to the system.
Setting up custom protocols for camera communication.
Managing and configuring internal and external storage devices.
Verifying the operational status and health of HDDs.
Configuring NAS and SAN storage devices.
Allocating storage space in Partition or Group modes.
Monitoring HDD health and detecting potential failures.
Setting up system alerts for various exception conditions.
Configuring how the NVR responds to sensor alarms.
Defining actions triggered by alarms or exceptions.
Procedures for managing the NVR's power state.
Steps to correctly power on the NVR.
Steps to correctly power off the NVR.
Procedure for restarting the NVR system.
Available features and controls in the live viewing interface.
Mouse interaction for live view controls.
Utilizing a secondary monitor for live view display.
Explanations of status icons displayed on camera feeds.
Toolbar for rapid access to common live view functions.
Contextual menu for live view adjustments.
Customizing display layout, dwell time, and audio.
Optimizing bandwidth for remote live view.
Initial setup for PTZ camera control.
Configuring automated camera movements.
Saving specific camera positions for quick recall.
Activating saved camera positions.
Creating sequences of camera movements (patrols).
Initiating predefined camera patrol sequences.
Recording and saving custom PTZ movement sequences.
Activating recorded PTZ movement patterns.
Direct control interface for PTZ cameras.
Settings for video recording parameters and schedules.
Configuring encoding parameters for camera video streams.
Setting up automated start/stop times for recording.
Scheduling periodic image capture.
Setting up motion detection to trigger recording.
Manually initiating and stopping video recording.
Grouping hard drives for organized recording.
Locking recorded files to prevent overwriting.
Accessing and reviewing recorded video footage.
Quick playback of the previous few minutes of video.
Standard playback of recorded video for a selected channel.
Reviewing footage from a specific date and time.
Searching playback based on event types like motion or alarm.
Locating and replaying video clips using user-assigned tags.
Intelligent playback that skips non-event periods.
Accessing playback through system event logs.
Playing video files from external storage devices.
Reviewing video one frame at a time.
Reversing playback for multiple channels.
Magnifying specific areas of playback video.
Saving recorded video data to external media.
Efficiently exporting video clips from selected cameras.
Exporting video clips based on search criteria.
Exporting video segments triggered by specific events.
Saving video segments directly from playback.
Creating new user profiles with specific permissions.
Removing existing user accounts from the system.
Modifying user details, passwords, and permissions.
Specific instructions for changing the admin account's password.
Setting up basic network parameters like IP address and gateway.
Configuring advanced network functionalities.
Setting up Dynamic DNS for remote access.
Configuring Network Time Protocol for accurate time synchronization.
Setting up a remote server for receiving alarm notifications.
Enabling multicast for network streaming capabilities.
Configuring Real Time Streaming Protocol for media streaming.
Customizing server and HTTP port numbers.
Setting up email notifications for system events.
Enabling Universal Plug and Play for network device discovery.
Displays current system status and configuration details.
Accessing and exporting system operational logs.
Backing up and restoring the NVR's configuration settings.
Updating the NVR's firmware to the latest version.
Resetting the NVR to its factory default settings.
Tools for monitoring and testing network performance.
Configuring a redundant hot spare for system reliability.
Copying HDD data to an eSATA disk for backup or migration.
Accessing the NVR's interface from a remote computer.
Viewing live camera feeds remotely via web browser.
Remotely reviewing recorded video footage.
Remotely accessing and reviewing system logs.
Remotely modifying NVR configuration settings.
Information on recommended hard drive types for NVRs.
Detailed steps for installing HDDs into the NVR chassis.
