Setting up the monitor | 31
8. Connect the power cable to the monitor.
9. Rout
e the required cables, such as USB upstream cable, USB downstream
cables (optional, cables are not included), HDMI cables (optional, cables
are not included), and DisplayPort cable through the cable-management
slot on the stand.
NOTE: The USB 3.2 Gen 1 (5 Gbps) cables and HDMI cable are not
shipped with your display, they are sold separately.
10.Connect
the required cables to the monitor.
NOTE: Dell monitors are designed to work optimally with Dell supplied
inbox cables. Dell does not guarantee the video quality and performance
when using non-Dell cables.
NOTE: Route each cable neatly so that the cables are organized before
the I/O cover is attached.
To Next Page
Loading...
