46 | Operating the monitor
When the monitor enters the Power Save Mode, the fol
lowing message appears:
Activate the computer and wake up the monitor to gain access to the Using the
On-Screen Display (OSD) menu.
NOTE: The message may be slightly different according to the connected
input signal.
If you press any button other than the power button, the
following message will
appear depending on the selected input:
NOTE: The message may be slightly different according to the connected
input signal.
If either HDMI or DP input is selected and the corresponding cable is not
connected, a
floating dialog box as shown below appears.
NOTE: The message may be slightly different according to the connected
input signal.
To Next Page
Loading...
