56 | Using AlienFX application
Setting lighting effects
The LIGHTING panel provides various lighting effects. You may click Effect to
open a drop-down menu with available options.
NOTE: The options displayed may vary depending on the lighting zone(s)
you specified.
The following table provides an overview of
different options:
Morph Descriptions
The effect changes the light color into another
through a seamless transition.
To make the adjustments:
1. Pick a preferred color from the color palette
or the list of PRESET COLORS. The selected
color and its RGB color codes will be
displayed on the right field.
NOTE: T
o change the color, use the up and down
arrow buttons beside the R/G/B boxes to edit the
color codes.
2. To
add the selected color to the list of YOUR
COLORS for quick access in the future, click
. At most 12 colors can be added to the list.
NOTE: To
remove an existing color chip from the
list, right-click on it.
3. Repeat th
e previous steps to specify Color 2
to be the ending light color.
4. Drag the BRIGHTNESS slider to adjust the
lightness of the color.
5. Drag the TEMPO slider to adjust the
transition speed.
To Next Page
Loading...
