9
1.4.2 Get on/off
1. Get on and off from the rear of the Alinker.
2. Set the parking brake of the Alinker when getting on and off.
Caution: If you stand alongside the Alinker and swing your leg over the frame like you
might with a bike, you may lose your balance.
1.4.3
Get on
1. Set the Alinker parking brake.
See 1.7.1. Set the parking brake of the Alinker.
2. Stand behind the Alinker and hold the
handlebars.
3. Slightly lift your leg and step over the saddle.
4. Put your full weight on the saddle. Weight on
the saddle gives stability when walking with
the Alinker.
5. When you are seated and feel stable, squeeze
the handbrake.
This unlocks the parking brake..
To Next Page
Loading...