Need help?Do you have a question about the Alinx ARTIX-7 FPGA and is the answer not in the manual?
General| Logic Cells | 33, 280 |
|---|---|
| DSP Slices | 90 |
| Block RAM | 1, 800 Kb |
| Clock Frequency | Up to 450MHz |
| Power Supply | 5V DC |
| Package Type | FTG256 |
| FPGA Family | Artix-7 |
| FPGA Device | XC7A35T |
| I/O Standards | LVCMOS, HSTL, SSTL |
| Ethernet | 10/100/1000 Mbps Ethernet |
| Configuration | JTAG |
Introduction to the AC7A035 core board, its features, and architecture.
Details about the Xilinx Artix-7 FPGA chip used on the core board.
Information on the two active differential crystals providing system clocks.
Details on the DDR3 DRAM configuration and connections on the core board.
Information about the QSPI FLASH memory for boot image storage.
Description of the LED indicators on the FPGA core board.
Details about the JTAG interface for programming and debugging.
Information on the power supply interface for standalone operation.
Detailed pin assignments for board-to-board connectors.
Information on the power supply system for the core board.
Specifications for the physical size dimensions of the core board.
Overview of the carrier board and its main interfaces and features.
Details about the Gigabit Ethernet interface and its configuration.
Information on the SFP interfaces for optical data communication.
Details on the PCIe x2 interface for high-speed data transfer.
Description of the HDMI output interface and its connection.
Information on the HDMI input interface and its connection.
Details about the MicroSD card slot for storage.
Information on the USB-to-UART bridge for serial communication.
Details about the onboard EEPROM and IIC communication.
Information on the LM75 temperature sensor and its I2C interface.
Details on the 40-pin expansion headers for connecting modules.
Information on the JTAG interface for FPGA programming and debugging.
Description of the user keys (RESET, KEY1-KEY4) on the carrier board.
Details about the user LED lights (LED1-LED4) and status indicators.
Information on the power supply methods and voltage conversions for the carrier board.
Details about the fan for cooling the FPGA chip and its control.
Specifications for the physical size dimensions of the carrier board.
To Next Page
