Resetting
You may reset Jawbone to its original settings at
anytime. You should not have to repeat the pairing
process after resetting Jawbone.
Press the reset button by inserting the metal end of the
earloop in the reset hole (center hole in the row of five
holes located at the back of Jawbone). Jawbone will
then be turned off and returned to its original settings.
Customize Your Fit
To wear your Jawbone, tuck the earloop behind your
ear, place the earbud snugly inside your ear, and rest
the voice activity sensor on your cheek as shown in the
diagram.
1
2
3
16 17
To Next Page
Loading...