· The power cable must have a drop loop to
avoid any condensation build up reaching
the mains (see diagram 1). If the plug does
get wet, DO NOT unplug the cord.
Disconnect the fuse or circuit breaker that
supplies power to the appliance. Then
unplug and examine for presence of water in
receptacle.
· Carefully examine your filter after installation.
Do not plug in the unit to the mains if there is
water on any parts not intended to be wet.
· If the unit shows any signs of water leakage,
disconnect the power supply cord from the
wall socket and consult All Pond Solutions or
the retailer you purchased this unit from for
further advice.
· If the plug or unit does get wet, DON'T unplug the cord. First, disconnect
the circuit breaker or fuse that supplies power to the appliance. Next,
unplug and inspect for water presence in the receptacle.
· To avoid injury, do not touch hot or moving parts such as, but not limited to,
heaters, reflectors, UV bulbs or impellers.
Please note – this appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge, provided they are given supervision and
instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance. Any maintenance must not
be made by children without supervision.
To Next Page
Loading...
