EasyManua.ls Logo

All Pond Solutions 2000EF - Filter Media Handling

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Filter Media
The filter media provided with your external filter and there positioning within
the media trays are designed to give complete and optimum filtration for your
tank:
BOTTOM MEDIA
TRAY
Ceramic Rings
Mechanic Filtration
Removes small
waste particles from
the water.
MIDDLE MEDIA TRAY
Bio Balls
Biological Filtration
Creates environment
for nitro-bacteria to
cultivate and help
oxygenate the water.
TOP MEDIA TRAY
Activated Carbon
Chemical Filtration
Removes soluble
waste, chlorine and
cultivates nitro-
bacteria.
Important! Always use water from your fish tank to clean your filter media. Do
not use mains water or any cleaning products to clean your media.
The suggested filter media order is ceramic rings at the bottom, bio balls in the
middle and active carbon at the top with one biochemical cotton in each tray,
providing mechanical, biological and chemical filtration as the water flows up
through the media baskets.
Please remember to change your activated carbon at least every 2-3 months as
after this time it is possible that the carbon can have a negative eect on your
aquarium as the very waste it removes can be released from the carbon back
into the aquarium.
When cleaning mechanical or biological media, NEVER rinse with tap water or
use any soap or detergent, only your aquarium water. The best time to rinse your
filter foams, bio balls and ceramic rings through is when doing a 10 / 20% water
change as you can use this water to wash the media through.
When replacing media in your filter, do not replace more than 50% of your
media at once. This is to ensure that the nitrifying bacteria present in the old
media are able to repopulate in the newly added filter media.

Related product manuals