To Next PageTo Next Page
Need help?Do you have a question about the AllEarth Renewables AllSun Tracker 24 Series and is the answer not in the manual?
Steps for installing the mast using helical pile or steel riser bases.
Steps for securing the mast to precast or custom pour bases.
Step-by-step guide for installing the 4.2 kW Power-One inverter.
Step-by-step guide for installing the 6 kW Power-One inverter.
Step-by-step guide for mounting the can assembly onto the mast.
Instructions for assembling rail sections for both tracker series.
Guidance on lifting and positioning the assembled frame onto the mast.
Steps for securely bolting the frame assembly to the mast.
Overview of PV module installation, including diagrams and tools.
Instructions for clamping PV modules securely to the rails.
Steps for routing and securing PV connecting wires with relief loops.
Instructions for using wire clips and checking string polarity.
Instructions for mounting and wiring the load center.
Instructions for mounting and wiring the 277V load center.
Steps for setting voltage jumpers and breakers for power up.
Detailed procedure for calibrating the tracker's position.
General| Maximum AC Current | 100 A |
|---|---|
| AC Output Power | 24 kW |
| Frequency | 60 Hz |
| Enclosure Rating | NEMA 3R |
| Rated AC Power | 24 kW |
| AC Voltage | 240 V |
| AC Voltage Range | 264 V |
| Dimensions | 24" x 12" |
