Need help?Do you have a question about the ALLEN & HEATH GX4816 and is the answer not in the manual?
Power| mains voltage operating range | 100-240V AC, 50/60Hz |
|---|---|
| power consumption | 80W max |
Operating Environment| operating temperature range | 0°C to 40°C (32°F to 104°F) |
|---|
Inputs and Outputs| mic/line XLR inputs | Balanced XLR, +48V phantom power |
|---|---|
| analogue XLR outputs | Balanced, Relay protected |
| output impedance | <75Ω |
| input sensitivity | -60 to +15dBu |
| nominal output | +4dBu = 0dB meter reading |
| analogue gain | +5 to +60dB, 1dB steps |
| maximum output level | +21dBu |
| pad | -20dB Active PAD |
| residual output noise | -95dBu (muted, 22Hz-22kHz) |
| maximum input level | +30dBu (PAD in) |
| input impedance | >4kΩ (Pad out), >10kΩ (Pad in) |
| mic EIN | -127dB with 150Ω source |
Weight and Dimensions| dimensions | 481.6 x 255 x 229.5 mm |
|---|---|
| weight | 8 kg |
| boxed dimensions | 560 x 385 x 310 mm |
| boxed weight | 10 kg |
Follow safety instructions for personal and operator safety, heed all warnings.
Balanced XLR mic/line inputs with +48V Phantom Power indicator and remote gain control.
Balanced XLR outputs operating at nominal +4dBu level.
EtherCon port for Gigabit Ethernet connection to the mixing system.
EtherCon ports for connecting DX Expanders over Fast Ethernet for audio and control.
Connect to mixer via CAT5e cable; firmware compatibility check required.
Connect DX32 or DX168/DX164-W expanders to DX ports.
Connect ME personal mixing systems to the DX2 port.
To Next Page
