108 Rockwell Automation Publication 22C-UM001J-EN-E - January 2017
Chapter 3 Programming and Parameters
d338 [Fault 4 Time-min] Related Parameter(s): A195
, d317
(With FRN 6.xx and later.)
Displays the value of the d317
[Elapsed Time-min] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0.0/60.0 Min
Display: 0.1Min
d339 [Fault 5 Time-hr] Related Parameter(s): A195, d316
(With FRN 6.xx and later.)
Displays the value of the d316
[Elapsed Time-hr] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0/32767 Hr
Display: 1 Hr
d340 [Fault 5 Time-min] Related Parameter(s): A195, d317
(With FRN 6.xx and later.)
Displays the value of the d317 [Elapsed Time-min] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0.0/60.0 Min
Display: 0.1Min
d341 [Fault 6 Time-hr] Related Parameter(s): A195, d316
(With FRN 6.xx and later.)
Displays the value of the d316 [Elapsed Time-hr] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0/32767 Hr
Display: 1 Hr
d342 [Fault 6 Time-min] Related Parameter(s): A195, d317
(With FRN 6.xx and later.)
Displays the value of the d317
[Elapsed Time-min] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0.0/60.0 Min
Display: 0.1Min
d343 [Fault 7 Time-hr] Related Parameter(s): A195, d316
(With FRN 6.xx and later.)
Displays the value of the d316
[Elapsed Time-hr] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0/32767 Hr
Display: 1 Hr
d344 [Fault 7 Time-min] Related Parameter(s): A195, d317
(With FRN 6.xx and later.)
Displays the value of the d317
[Elapsed Time-min] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0.0/60.0 Min
Display: 0.1Min
To Next Page
Loading...