Need help?Do you have a question about the Allen-Bradley 22C-D142A103 and is the answer not in the manual?
General| Manufacturer | Allen-Bradley |
|---|---|
| Model Number | 22C-D142A103 |
| Category | Controller |
| Voltage Rating | 480V AC |
| Current Rating | 142 A |
| Number of Poles | 3 |
| Enclosure Type | Open |
| Amperage | 142 A |
| Product Type | AC Drive |
| Voltage | 480V AC |
| Enclosure | Open |
Outlines requirements for connecting the drive to system ground for safety.
Information on required input fuses or circuit breakers for short circuit protection.
Steps to take before applying power to the drive for startup.
Provides step-by-step instructions for navigating and modifying drive parameters.
Lists commonly programmed parameters for basic drive setup and operation.
Lists and describes various fault types with their causes and corrective actions.
Provides troubleshooting guidance for common drive symptoms like "Motor does not Start".
Provides recommended AC line input fuse and circuit breaker information.
Details the feature for operating up to three auxiliary motors in addition to the main drive-controlled motor.
To Next Page