Allen-Bradley E300 Installation Instructions

Installation Instructions
Original Instructions
E300 Electronic Overload Relay
Bulletin Numbers 193, 592
Topic Page
North American Hazardous Location Approval 3
Introduction 4
Before You Begin 4
What You Need 5
Assemble the E300 Relay 5
Wire the E300 Relay 7
Set the IP Address 9
E300 Configuration via Rotary Dial Addressing 9
E300 Relay Configuration via the BOOTP/ DHCP Utility 10
Downloading the Electronic Data Sheet (EDS) File 13
Additional Resources 16

Allen-Bradley E300 Specifications

General

Type	Electronic Overload Relay
Mounting	DIN Rail or Panel Mount
Protection Class	IP20
Voltage Range	24…690 V AC/DC
Communication Options	EtherNet/IP, DeviceNet
Protection	Overload, phase loss, ground fault
Operating Temperature	-20°C to 60°C