Allen + Roth 41997 - Step 7: Hang Fixture; Step 8: Attach Finial; Step 9: Insert Bulb

7
ASSEMBLY INSTRUCTIONS
7. Hang xture on the two mounting bracket screws (B)
and secure with screw caps (C).
8. Lift the nial cap (F) over the threaded rod at the
bottom of the nial (E). Attach to the hole in the top of
the xture (D) by turning the nial (E) in a clockwise
direction.
9. Insert the E26-base bulb (not included) into the socket
of the xture (A).
7
8
9
Bulb
B C
E
F