EasyManua.ls Logo

Allen + Roth TPGAZ17-002 User Manual

Allen + Roth TPGAZ17-002
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ITEM #0510327
12 FT × 10 FT GAZEBO
MODEL #TPGAZ17-002
ATTACH
YOUR RECEIPT HERE
Serial Number
___________
Purchase Date
___________
1
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-439-9800, 8 a.m. - 8 p.m., ES T, Monday - Friday.
welcoming · sophisticated · inspiring
allen + roth is a registered trademark
of LF, LLC. All Rights Reserved.
AB17739
Espanol p. 12
Question and Answer IconNeed help?

Do you have a question about the Allen + Roth TPGAZ17-002 and is the answer not in the manual?

Allen + Roth TPGAZ17-002 Specifications

General IconGeneral
Product NameAllen + Roth TPGAZ17-002
CategoryOutdoor Furnishing
Frame MaterialSteel
Weather ResistanceYes
MaterialFabric and Steel
StyleContemporary

Summary

Package Contents

Hardware Contents

Safety Information

Warning and Caution

Safety warnings about flame, heat, and weather conditions.

Preparation

Checks before assembly, time estimate, and tools required.

Installation Instructions

Step 1: Assemble Supporting Posts

Assembling base posts with plates, bolts, and caps.

Step 2: Assemble Long Crossbars

Connecting long left and right crossbars with bolts and caps.

Step 3: Assemble Short Crossbars

Connecting short left and right crossbars with bolts and caps.

Step 4: Attach Crossbar Assemblies to Posts

Securing crossbars to supporting posts using bolts and caps.

Step 5: Connect Top Poles

Inserting small connector poles into long top connector poles.

Step 6: Attach Roof Connector Hook

Screwing the hook into the roof connector.

Step 7: Install Top Poles into Roof Connector and Posts

Inserting long top connector poles into roof connector and small connector poles into posts.

Step 8: Install Short Top Poles

Installing short top poles into roof connector and crossbars.

Step 9: Assemble Top Beams and Finial

Inserting top beams into connectors and attaching vent cover and finial.

Step 10: Place Fabric Cover

Loosely placing the fabric cover on the assembly.

Step 11: Tighten Fabric Cover

Pulling the fabric cover over connector poles to tighten it.

Step 12: Hang Mosquito Net and Curtains

Hanging mosquito nets and curtains on crossbars.

Step 13: Secure Gazebo with Stakes

Inserting stakes through post bottom plates into the ground for stability.

Canopy Removal Recommendation

Manufacturer's advice to remove canopy during high winds, heavy rain, or snow.

Care and Maintenance

Warranty Information

Replacement Parts List

Information and contact for ordering replacement parts.

Related product manuals