Why Allen + Roth WSWS-VWU1C Indoor Furnishing closet tower can not hang on the wall?
The Allen + Roth Indoor Furnishing closet tower might not hang on the wall if the mounting holes are incorrectly located. To resolve this, reinstall the wall hanging cleats, ensuring the bottom two mounting holes are more than 30-1/2 inches from the floor.
How to fix a tilted Allen + Roth Indoor Furnishing closet tower?
If your Allen + Roth Indoor Furnishing closet tower is tilted, it's likely because the wall hanging cleats are not level. Reinstall the wall hanging cleats, making sure they are level to correct the tilt.
What to do if Allen + Roth WSWS-VWU1C closet tower can not hang on the wall?
If your Allen + Roth indoor furnishing closet tower cannot hang on the wall, the mounting hole locations might be incorrect. To resolve this, reinstall the wall hanging cleats, ensuring that the space between the two wall hanging cleats is 40.6 inches and the bottom two mounting hole locations are no less than 31-1/2 inches from the wall.
Why is my Allen + Roth WSWS-VWU1C closet tower tilted?
If your Allen + Roth indoor furnishing closet tower is tilted, it might be because the wall hanging cleats are not level. To fix this, reinstall the wall hanging cleats, making sure they are level.
Access 3D-guided assembly instructions via the BILT app.
Call for questions, problems, or missing parts.
Insert hardware and attach side panels and right shelves.
Assemble left panel and install adjustable shelves.
Prepare and hang the unit on the wall.
General| Width (in) | 36 |
|---|---|
| Sink Material | Ceramic |
| Number of Doors | 2 |
| Number of Drawers | 3 |
| Hardware Finish | Brushed Nickel |
| Finish | Painted |
| Number of Lights | 0 |
| Type | Vanity |
| Product Type | Vanity |
| Width | 36 In |
To Next Page
