22
Appendix 2
Accompanying Documents:
A. Instructions for use
1. MODEL 3600 needs special precautions regarding EMC and needs to be installed and
put into service according to the EMC information provided in the ACCOMPANYING
DOCUMENTS;
2. Portable and mobile RF communications equipment can affect MODEL 3600.
B. Technical description
1. MODEL 3600 needs to be installed and put into service in accordance with the
information provided in the ACCOMPANYING DOCUMENTS.
2. Wireless communications equipment such as wireless home network devices,
mobile phones, cordless telephones and their base stations, walkie-talkies can affect
MODEL 3600 and should be kept at least a distance d away from the
MODEL 3600.
3. Warning that the use of accessories, transducers and cables other than those
specified with the exception of transducers and cables sold by the manufacturer
of the MODEL 3600 as replacement parts for internal components, may result in
increased EMISSIONS or decreased IMMUNITY of the MODEL 3600.
4. Warning that the MODEL 3600 should not be used adjacent to or stacked with other
equipment.
5. Guidance and manufacturer’s declaration – electromagnetic emissions
The MODEL 3600 is intended for use in the electromagnetic environment specified
below. The customer or the user of the MODEL 3600 should assure that it is used in
such an environment.
Emissions Compliance Electromagnetic Environment Guidance
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Group 1
Class B
N/A
N/A
The MODEL 3600 uses RF energy only
for its internal function. Therefore, its
RF emissions are very low and are not
likely to cause any interference in nearby
electronic equipment.
The MODEL 3600 is suitable for use in
all establishments, including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes.
To Next Page