To Next PageTo Next Page
Need help?Do you have a question about the Alliance Laundry Systems ADG3SRGS115TW01 and is the answer not in the manual?
General| Brand | Alliance Laundry Systems |
|---|---|
| Model | ADG3SRGS115TW01 |
| Category | Dryer |
| Fuel Type | Electric |
| Type | Commercial |
| Voltage | 115V |
| Phase | 1 |
| Heating Source | Electric |
| Capacity | 3.5 cu. ft. |
| Reversing Action | Yes |
| Drum Material | Stainless Steel |
| Exterior Material | Painted Steel |
| Door Type | Glass |
| Door Swing | Reversible |
| Cool Down Cycle | Yes |
| Lint Filter | Yes |
| Wrinkle Prevention Option | Yes |
| Energy Star Certified | No |
| Warranty | 1 Year |
| Amperage | 15A |
| Width | 27 inches |
Guidance on finding qualified technicians for service and repairs.
Information on obtaining literature, parts, and technical assistance.
Details on how to identify specific dryer models.
Instructions on finding the serial plate for product identification.
Procedures for diagnosing why the dryer timer isn't advancing in auto cycles.
Troubleshooting flowchart for a dryer that fails to start or run.
Diagnosing issues like premature stopping, burning smell, or thermal protector trips.
Troubleshooting steps when the motor operates but the drum is stationary.
Steps to diagnose a dryer motor that fails to shut off.
Troubleshooting a dryer that operates only with the door ajar.
Diagnosing failures in the heating system or burner ignition.
Troubleshooting gas dryer igniters when gas supply is adequate.
Diagnosing recurring burner ignition and shutdown issues in gas dryers.
Troubleshooting gas dryers where the igniter glows but the burner fails to light.
Procedures for a heating system or burner that stops unexpectedly during operation.
Diagnosing heating system or burner cycling due to limit thermostat issues.
Steps to troubleshoot a heating system or burner that stays on.
Troubleshooting steps when laundry is not drying properly.
Diagnosing issues with the timer or electronic control not progressing.
Troubleshooting excessive heat or overheating of clothes.
Diagnosing and resolving loud chattering or vibrating noises from the dryer.
Troubleshooting unusual humming or whistling sounds from the dryer.
Instructions for properly leveling the dryer using its adjustable legs.
Procedures for adjusting the burner flame for optimal performance.
Testing procedures for the dryer's timer electrical contacts.
Testing procedures for the dryer's fabric selector switch.
Test procedures for the dryer's drive motor, including resistance checks.
Testing procedures for the motor switch in conjunction with the drive motor.
Testing procedures for the motor windings of the drive motor.
Detailed steps for testing and replacing the motor switch.
Testing the electrical components of the gas dryer ignition system.
Procedures for testing the gas valve coils on gas dryer models.
Testing procedures for the sensor in gas dryer models.
Procedures for testing the igniter on gas dryer models.
Testing procedures for the thermal fuse in electric dryer models.
Testing procedures for the heater assembly in electric dryer models.
Testing procedures for cycling and limit thermostats.
Testing procedures for the dryer's door switch.
Overview of the main components of the gas burner system.
Explanation of the electrical circuits active before ignition.
Description of the burner circuit operation during ignition.
How the system reacts to brief power interruptions.
How the system responds to a loss of flame during operation.
What happens when ignition fails to establish.
