To Next PageTo Next Page
Need help?Do you have a question about the Alliance Laundry Systems ADGE8RGS113TW01 and is the answer not in the manual?
General| Brand | Alliance Laundry Systems |
|---|---|
| Model | ADGE8RGS113TW01 |
| Category | Dryer |
| Language | English |
Guide to finding qualified service technicians and authorized parts distributors for maintenance and repairs.
Contact information for obtaining literature, replacement parts, and technical assistance from Alliance Laundry Systems.
Instructions on how to find the model and serial numbers on the dryer's serial plate for identification.
Lists the washer models to which the information in this manual is applicable.
Procedures for diagnosing why the dryer timer does not advance during automatic cycles.
A flowchart to diagnose issues when the dryer motor fails to start or operate.
Troubleshooting steps for dryers that stop mid-cycle, smell of burning, or trip the motor thermal protector.
Diagnosing problems when the dryer motor operates, but the cylinder remains stationary.
Steps to identify why the dryer motor fails to shut off after the cycle completes.
Troubleshooting guide for dryers that only operate when the door is ajar.
Steps to resolve issues where the dryer's heating element or burner fails to activate.
Troubleshooting for gas dryers where the igniter fails to glow, assuming adequate gas supply.
Diagnosing gas dryer issues where the burner repeatedly ignites and then extinguishes.
Troubleshooting gas dryers where the igniter glows but the main burner fails to ignite.
Procedures for diagnosing why the dryer's heating element or burner shuts down before the cycle's end.
Steps to troubleshoot dryers where the heating system repeatedly cycles off due to the limit thermostat.
Diagnosing issues where the dryer's heating assembly or burner fails to turn off.
Troubleshooting steps for when clothes are not drying properly in the dryer.
Steps to diagnose why the timer or electronic control fails to advance during an automatic cycle.
Troubleshooting guide for dryers that leave clothes excessively hot upon removal.
Steps to identify and resolve loud chattering or vibrating noises originating from the dryer.
Diagnosing and fixing excessive humming or whistling sounds produced by the dryer.
Instructions on how to properly level the dryer using its adjustable legs for stability.
Guide for adjusting the burner flame on gas dryer models for optimal operation.
Procedures for testing the continuity and resistance of timer contacts using a multimeter.
Steps to test the fabric selector switch on electric and gas dryer models for proper function.
Instructions for testing the drive motor, including resistance checks and disassembly.
Procedures for testing the motor switch associated with the drive motor for proper operation.
Steps to test the resistance of the drive motor windings to identify potential faults.
Detailed steps for removing, replacing, and testing the dryer's motor switch.
Explanation of the components and pre-ignition circuits for gas dryer burner systems.
Procedures for testing the electrical circuit responsible for igniting the gas burner.
Steps to check the resistance of gas valve coils to ensure proper operation.
Procedure for testing the gas dryer's sensor for continuity and proper function.
Instructions for testing the igniter's resistance to ensure it glows correctly.
Steps to test the thermal fuse on electric models for continuity, indicating if it has blown.
Procedures for testing the resistance of the heater assembly on electric dryer models.
Steps to test the cycling or limit thermostat for continuity to ensure correct operation.
Procedures for testing the dryer's door switch for proper continuity in open and closed states.
Wiring schematic and information for the internal connections of the dryer motor switch.
