Programming Supplement
7
1300546
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Entering Programming Mode
For programming finisher parameters, it is necessary
to enter the Programming Mode.
How to Enter Programming Mode
1. Press the START and STOP keypads
simultaneously and turn finisher on.
2. The temperature display shows the value of the
first parameter to set, while the speed display
shows a letter or a number that identifies the
parameter. The temperature display blinks to
indicate that the value is ready to be changed.
3. Press the Display Preset Temperature keypad
(SET) until the desired option appears in the
temperature display.
To Next Page
Loading...
