Need help?Do you have a question about the Allied Healthcare EPV200 and is the answer not in the manual?
General| Brand | Allied Healthcare |
|---|---|
| Model | EPV200 |
| Category | Medical Equipment |
| Language | English |
Details the intended application and environments for the EPV200 ventilator.
Provides explanations for potential hazards and precautions during use.
Lists and defines common abbreviations used in the manual.
Specifies the required oxygen supply pressure and safety relief settings.
Defines the selectable ranges for breaths per minute and inspiratory time.
Defines the selectable range for tidal volume delivery.
Details activation points for low gas, high pressure, and breath delivery alarms.
Specifies battery operational time and environmental conditions.
Provides physical dimensions, weight, and breathing mode information.
Descriptions of controls for tidal volume, inspiratory time, and BPM.
Descriptions of the airway pressure and BPM displays.
Locations and functions of oxygen inlet and patient circuit connections.
Details on anti-suffocation valve and alarm indicators.
Location and function of the power switch and battery compartment.
Important safety warnings to be observed during operation.
Procedure for connecting the oxygen supply.
Guide to selecting the appropriate inspiratory time.
Instructions for setting the desired breaths per minute.
Instructions for selecting the desired tidal volume.
Procedure to verify the pressure relief setting.
Instructions for connecting the patient breathing circuit.
Steps to ensure the patient is receiving adequate ventilation.
How the ventilator responds to spontaneous patient breaths.
Impact of cold temperatures on battery life and operation.
Details the high airway pressure alarm activation and behavior.
Details the low source gas alarm activation and behavior.
Details the low battery alarm activation and behavior.
Details the breath delivery alarm activation and behavior.
Describes how to use the silence button for alarms.
Step-by-step guide for replacing the ventilator batteries.
Instructions for cleaning the EPV200 unit.
Details the annual checks for proper function and battery replacement.
Schedule for replacing specific components like the O2 inlet hose and main valve.
Information on the unit's lifespan and rebuild requirements.
List of necessary equipment for yearly verification.
Step-by-step guide for performing the yearly verification.
Procedures for testing pressure relief and various alarms.
Steps for checking general ventilator operation.
Procedure for checking the functionality of various alarms.
List of optional accessories for the EPV200 ventilator.
Details the terms and conditions of the product warranty.
Estimated times for oxygen depletion from an E cylinder.
Estimated times for oxygen depletion from a Jumbo D cylinder.
Estimated times for oxygen depletion from a D cylinder.
Explanation of various symbols used on the device and in the manual.
Details compliance with EMC limits for medical devices.
Lists performance and safety standards the EPV200 adheres to.
Specifies the electrical safety requirements met by the device.
Details standards for transportation and storage of the unit.
Recommended settings based on male patient height and weight.
Recommended settings based on female patient height and weight.
Table showing flow rate and I:E ratios for various BPM settings.
Recommended settings for males with 1-sec inspiratory time.
Recommended settings for females with 1-sec inspiratory time.
Table showing flow rate and I:E ratios for 1-sec IT.
Instructions on how to attach the EPV200 to other equipment.
To Next Page
