Allied Telesis AT-2700FX - Removing an Adapter Driver from Novell Netware 6.5 Server

Network Adapter Card Installation Guide
123
SET MINIMUM PACKET RECEIVE BUFFERS = 100 (or larger)
SET MAXIMUM PACKET RECEIVE BUFFERS = 500 (or larger)
The minimum value must be at least 30 times the number of PCI adapters
in the computer. Recommended settings are:
1-3 adapters: 100
4 adapters: 150
The maximum permitted value depends on the amount of memory in the
server. It must be greater than the minimum value.
Removing an
Adapter Driver
from Novell
Netware 6.5
Server
This section contains the procedure for removing a network adapter driver
from a system running Novell Netware 6.5 Server.
To remove a driver, you can either use the NWCONFIG program supplied
with NetWare or edit the AUTOEXEC.NCF file in the SYS:SYSTEM
directory with a text editor. The procedure below explains how to remove a
driver using the NWCONFIG program.
1. Type NWCONFIG at the server console to bring up the installation
module.
2. Select Driver Options and press Return.
3. Select Deselect a selected driver from the next menu and press
Return. This moves the highlight to the installed adapter(s).
4. Select the adapter you want to remove.
5. Press Return again to remove the selected driver.