Need help?Do you have a question about the Allied Telesis AT-2711FX/LC and is the answer not in the manual?
General| Device Type | Network adapter |
|---|---|
| Form Factor | Plug-in card |
| Interface (Bus) Type | PCI Express x1 |
| Connectivity Technology | Wired |
| Data Transfer Rate | 1 Gbps |
| Optical Fiber Connector Type | LC |
| Distance | Up to 550 m |
| Wavelength | 850 nm |
| Fiber Type | Multi-mode |
| Ports | 1 x LC |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Standards | IEEE 802.3u |
| Operating Temperature | 0 °C to 50 °C |
Outlines the necessary hardware and software prerequisites for installing the adapter.
Covers essential safety guidelines and warnings to follow before installation.
Provides step-by-step instructions for physically installing the network adapter card.
Guides users on how to download the necessary driver software from the Allied Telesis website.
Provides instructions for installing the driver software using Device Manager for different OS versions.
Explains how to perform an automated, unattended driver installation using DPInst.
Details advanced properties supported by different driver versions and OS.
Provides step-by-step instructions to remove the driver via Device Manager.
Offers a list of recommended actions to resolve installation or operation problems.
To Next Page
