Allied Telesis AT-2711FX/LC User Manual

Modifying Advanced Properties
108
TCP/UDP Checksum Offload (IPv4)
The TCP/UDP Checksum Offload (IPv4) function enables the adapter to
compute the checksum of transmitting IPv4 packets and verify the
checksum of receiving IPv4 packets, taking load off from the CPU.
To modify the TCP/UDP Checksum Offload (IPv4) setting, do the
following:
1. Access the Device Manager on your operating system.
See “Accessing Advanced Properties” on page 76.
2. Select TCP/UDP Checksum Offload (IPv4) in the Property box.
The TCP/UDP Checksum Offload (IPv4) page is displayed as shown
in Figure 60.
Figure 60. TCP/UDP Checksum Offload (IPv4) Page

Allied Telesis AT-2711FX/LC Specifications

General

Brand	Allied Telesis
Model	AT-2711FX/LC
Category	Adapter
Language	English