Allied Telesis AT-2711FX/LC User Manual

Installing the Driver Software for Windows Systems
56
Updating the
Driver on
Windows Server
2008, Windows
Vista, or
Windows 7
To update the driver software for your AT-2711 series adapter card,
perform the following procedure:
1. Access the Device Manager. See “Accessing Device Manager on
Windows Server 2008, Windows Vista, or Windows 7” on page 41.
2. In the Device Manager window, right-click Allied Telesis AT-
2711xXV2 100Mb Fiber Ethernet.
The shortcut menu appears as shown in Figure 34.
Figure 34. Device Manager with an Expanded List on Windows Server
2008, Vista, and 7
3. Select Update Driver Software.
The Update Driver Software window pops up as shown in Figure 25 on
page 48.
4. Select Browse my computer for driver software.
The Update Driver Software window prompts you to enter the location
of the driver folder as shown in Figure 26 on page 49.
5. Specify the location of the driver software.
6. Click Next.
The confirmation message appears when the driver software is
successfully updated. See Figure 27 on page 50.
7. Click Close.

Allied Telesis AT-2711FX/LC Specifications

General

Brand	Allied Telesis
Model	AT-2711FX/LC
Category	Adapter
Language	English