C613-02090-00 REV A Allied Telesis Milestone Integration Plug-In User Guide Page 3
Restrictions and Limitations
Restrictions and Limitations
The Allied Telesis Milestone Integration Plug-In is currently not designed to be used with switches
configured in Virtual Chassis Stacking (VCStack) modes.
The Allied Telesis Milestone Integration Plug-In currently does not manage power settings on the
“spare” Ethernet lines. These lines (pins 4, 5, 7, and 8) are used in the “Mode-B” and “High-Power”
(60W) PoE configurations on certain AlliedWare Plus switches, such as the AT-IE300. The Plug-In
should be used to configure switch ports in “Mode-A” configurations.
To Next Page
Loading...
