C613-02090-00 REV A Allied Telesis Milestone Integration Plug-In User Guide Page 5
Network Configuration
In the example above, the AR4050S UTM Firewall is used on the client network and the IE300-12GP
PoE Switch is used on the camera network. If we suppose that port1.0.1 on the IE300 is connected
directly to the AR4050S, and the client network is configured for the address range 192.168.15.0/24,
the configuration for the IE300-12GP would be something like this:
By having the PoE camera ports on a different VLAN than the uplink management interface, the
client network remains logically segregated from the camera network. Care should be taken to
ensure that the uplink ports on the PoE switch are physically secure from intrusion.
configure terminal
vlan database
vlan 2
exit
interface port1.0.1
switchport access vlan 2
exit
interface vlan2
ip address 192.168.15.100/24
exit
exit
exit
Management Server
Event Server
Log Server
XProtect
Management Client
XProtect
Smart Client
Camera
Network
VLAN 1
AT-AR4050S
Switch Management
Network VLAN 2
Recording
Servers
Cameras
Client Network
AT-IE300-12GP
To Next Page
Loading...
