Need help?Do you have a question about the Allied Telesis x900-48FE and is the answer not in the manual?
General| Brand | Allied Telesis |
|---|---|
| Model | x900-48FE |
| Category | Switch |
| Language | English |
Lists specific models including AT-8948, x900-48FE, x900-48FE-N, and x900-48FS.
Lists Gigabit switch models: AT-9924T and AT-9924SP.
Lists expandable Gigabit switch models: AT-9924Ts, x900-12XT/S, x900-24XT, x900-24XT-N, x900-24XS, SwitchBlade x908.
Explains the LEDs for Fast Ethernet RJ-45 ports.
Describes the LEDs for Gigabit RJ-45 ports.
Details the operational status and faults indicated by XFP port LEDs.
Explains the LEDs for SFP ports and their meanings.
Describes the system LEDs indicating operations and faults.
Explains the LEDs related to stacking operations and faults.
Details the standard RS-232 ASYN0/CONSOLE port for initial configuration.
Describes the dedicated 10/100/1000 Mbps Ethernet port for management traffic.
Describes SFP transceivers, ports, and supported speeds/duplex.
Details XFP transceivers and their compatibility with expansion modules.
Lists devices and features associated with RJ-45 ports.
Table showing PSU and fan compatibility with different switch models.
Setting up a new connection description in HyperTerminal.
Configuring COM port settings like baud rate and data bits.
Setting terminal emulation and key behavior properties.
Configuring ASCII sending and receiving options for the terminal.
Steps to connect a terminal and restart the switch to enable diagnostics.
Information on running diagnostic programs and available control keys.
Initial steps and checks for basic switch troubleshooting.
Troubleshooting guide for when the Link/Activity LED is not illuminated.
Steps to resolve issues when the Power LED is off.
Guidance for troubleshooting when the Fault LED is illuminated.
Links to further resources for troubleshooting switch issues.
To Next Page